Shop 

Menu
24 Month Warranty

Returns & Warranties

We are proud of the products we sell and we hope you have a great experience. If you believe a product you purchased from the Canon Store is defective, then you may have a right of return and/or other remedies under either our voluntary warranty (please refer below or to your Warranty Card) and/or the Consumer Guarantees under the Australian Consumer Law - see consumerlaw.gov.au

CANON MANUFACTURER’S WARRANTY FOR CONSUMER IMAGING PRODUCTS
(applies to purchases made on or after 20 July 2015)

This warranty applies to Canon consumer products (Products) that are purchased in Australia or New Zealand from Canon Australia Pty Ltd or Canon New Zealand Limited (Canon) or their respective authorised distributors, dealers or retailers.

Canon-branded products purchased from other sources (including ‘grey’, ‘parallel’ or ‘direct’ imports) are not covered by this warranty. These products may come with a different warranty offered by the retailer or relevant sales company based in another country.

You will need proof of purchase to make a warranty claim so please keep your receipt and warranty card safe. You can also register your product on our website as a record of your purchase.

Consumer Guarantees

You have rights under applicable Australia and New Zealand consumer laws.

For goods supplied in Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For goods supplied in New Zealand only: This warranty applies in addition to your rights under the Consumer Guarantees Act 1993. Further information on the Consumer Guarantees Act is available from Consumer Affairs.

Canon manufacturer’s warranty

In addition to your consumer rights, Canon offers the following manufacturer’s warranty:

  1. With normal use and service, during the Warranty Period stated below, Canon warrants the Products will be free from defects arising wholly or substantially from faulty parts, manufacture and workmanship:

    Product: purchased new and unused, or Canon-refurbished product (not second hand) Warranty Period (from date of purchase)
    Projector Products (excluding lamps) and standard accessories 36 months
    Projector Lamps 6 months
    Image Stabilizer binoculars 24 months
    IP/Network Video Cameras 24 months
    Interchangeable and fixed lens cameras 24 months
    Cinema EOS products 24 months
    Canon camera lens 24 months
    Digital Video Cameras 24 months
    PIXMA PRO Range 24 months
    All other consumer products and their standard Canon accessories 12 months
  2. Canon’s warranty does not cover:

    1. replacing consumables including print heads, drums, lamps, film, ink, toner and paper;
    2. rubber rollers in scanners; or
    3. any software included with the Products.
  3. Canon’s warranty does not apply where damage is caused by external factors including:

    1. normal wear and tear;
    2. damage caused outside Canon’s control such as accidents, vandalism or burglary;
    3. your negligent or improper use of the Products including failing to follow operating instructions;
    4. leaking batteries;
    5. liquid exposure (except water for waterproof Products) or infiltration of foreign particles;
    6. repairs or modification of the Products except by Canon, or its authorised service agents;
    7. using unsuitable ink or toner or other materials in the Products;
    8. using any accessories, supplies, parts or devices (including batteries, tapes/cards, lenses and flash attachments) not conforming to Canon’s specifications; or
    9. shipping or other transit.
  4. Subject to your rights under consumer law, Canon excludes all liability in respect of the Product for any loss that is not reasonably foreseeable from a failure of the Product, which may include liability for negligence, loss of tape/card, loss of images, loss of data, loss of expenditure associated with the Product, losses incurred while the product is being repaired and loss of enjoyment.
  5. This warranty is not transferrable.


MAKING A WARRANTY CLAIM

The process for making a claim may differ for some products. Please see the claims processes below.

Projectors (only those purchased in Australia)

To make a claim notify Canon as soon as possible by telephoning 1300 799 604 (Australia).

You may be asked to provide a written description of the problem, images or other relevant material. Remember, please have your proof of purchase ready. The service team will try to troubleshoot the problem with you first.

If your projector problem cannot be rectified over the phone, Canon will organise for it to be collected and a replacement model will be delivered to you upon receipt. Ownership of the faulty projector will pass to Canon upon receipt by Canon or its agents. Replacement projectors will be the same and/or equivalent projector model, subject to availability. The replacement model may be a new or refurbished ‘as new’ unit projector, determined at the discretion of Canon.

(please note – Canon will pay for courier costs to pick up any faulty units as identified by our customer care trouble shooting team, however costs for unmounting projectors and/or securely and safely packaging them for safe travel back to Canon is at the cost of the end user)

Document Scanners*, Faxes** and Micrographics (only those purchased in Australia)

* Does not apply to P Series Scanners
** Applies only to those models of laser faxes that can also be used as stand alone printers

To make a claim, notify Canon as soon as possible by telephoning Canon on 13 13 83 (Australia). You may be asked to provide a written description of the problem, images or other relevant material. The service team may try to troubleshoot the problem with you first. Remember, please have your proof of purchase ready.

If the warranty claim is accepted Canon will, at its cost, repair or replace any faulty parts or rectify any faulty workmanship.

Where the Product is located:

  1. within a 25km radius of a Canon Direct Service Centre:

    warranty repairs will be carried out on-site by Canon or Canon authorised service agents; and Canon will use its best endeavours to carry out such repairs by the end of the day after Canon receives notice of the warranty claim (except that this period shall not include weekends or public holidays).

  2. outside a 25km radius: a fee will be charged for provision of on site warranty services. 

All other products
To make a claim, notify Canon or our authorised service agents as soon as possible by telephoning Canon on 13 13 83 (Australia) or 0800 222 666 (New Zealand). You can also email Canon Australia by submitting an enquiry at: www.canon.com.au/en-AU/Personal/Support-Help You can email Canon New Zealand at: helpdesk@canon.co.nz Or see: canon.com.au/warranty (Australia) or canon.co.nz/warranty (New Zealand)

You may be asked to provide a written description of the problem, images or other relevant material. The service team may try to troubleshoot the problem with you first. Remember, please have your proof of purchase ready. If we need to examine the Product then, except as otherwise required by consumer law, you must pay for all packing, freight and insurance costs to ship the Product to Canon or its authorised service agent. 

If Canon accepts your warranty claim, we will, at our cost (and subject to your rights under consumer law) repair or replace any faulty parts or rectify any faulty workmanship, and return the Product to you.
If your warranty claim is not accepted, Canon or its authorised service agents may still be able to resolve your problem, where that service is charged at our standard rates (only with your prior approval).

Features

Light-weight and compact, the EOS M100 is a fun and easy to use mirrorless camera for when you are out taking photos and videos on the go. Featuring a range of smart shooting modes, the EOS M100 is the perfect camera for people looking to take their first step into interchangeable lens photography. Make it unique to you with nine optional coloured camera body jackets.


Simple Selfies
The M100 has a 180 degree flip up touch screen with in-built self portrait mode, for the perfect selfie. Simply touch the screen for quick and accurate focus, and once the camera has found focus, it will take a photo.


Easy As, Time Lapse Movies
With built-in time lapse movie mode, create stunning time lapse videos using the touch of a button. Simple, easy, very Instagrammable.

A great camera for video
The EOS M100 features Dual Pixel CMOS AF, which means it has high-precision AutoFocus, working especially well with moving subjects. It also has touch AutoFocus for easy, intuitive and fast focusing. With the 180 degree tilt up touch screen, set the EOS M100 up on a tripod and start recording – it’s so simple!

Upload your images quickly and easily
With in-built Wi-Fi, Bluetooth® and NFC connectivity, you can share your images quickly and easily. Bluetooth® creates a constant connection between the EOS M100 and your smartphone, letting you download your photographs without taking the camera from your bag.

Selected shots from the EOS M100 KIT

Accessories

Specifications

General

HideShow
Barcode 4549292093728

Sensor

HideShow
Sensor Type CMOS
Sensor Size 22.3 x 14.9mm CMOS
Effective Pixels 24.2 Megapixels
Total Pixels Approx. 25.8 megapixels
Aspect Ratio 3:2
Sensor Cleaning EOS integrated cleaning system
Colour Filter Type Primary Colour

Processor

HideShow
Processor Type DIGIC 7

Focusing

HideShow
Focusing Type Dual Pixel CMOS AF System. Phase detection pixels built onto imaging sensor [20]
AF System/ Points Maximum 49 AF points (Fixed location on 7x7 grid) via camera automatic selection [15], Freely position 1 AF point/ 1 AF Zone (9 points, 3x3 grid) via manual selection [20]
AF working range EV -1 - 18 (at 23 °C, ISO 100, with EF-M 22mm f/2 STM)
AF Modes One-Shot AF and Servo AF
AF Point Selection Face + Tracking: Face and subject tracking via automatic recognition/ manual selection via touchscreen. Automatic selection over 49 AF points when no face recognised within frame. Smooth Zone AF: Manual zone selection, plus automatic selection over 9 AF p
Selected AF point display Indicated on LCD monitor/ EVF
AF Lock Locked when shutter button is pressed half way or customisable AE Lock Button
AF Assist Beam via LED assist beam
Manual Focus With EF & EF-S lenses - Select via AF/MF switch on lens. With EF-M lenses - Select via dedicated MF Button/ other customisable buttons (toggle AF/MF). MF Peaking available. AF+MF available (Manual focus adjustment after One-Shot AF). Magnify image availab

Exposure Control

HideShow
Metering Modes Real-time metering from the image sensor (1) Evaluative metering (384 zones) (2) Partial metering at center (approx. 10% of Live View Screen) (3) Center weighted average metering (4) Spot metering (approx. 2% of Live View Screen)
Metering Range Still image: EV 1 - 20 (at 23 °C, ISO 100) Movie: EV 2 - 20 (at 23 °C, ISO 100)
AE Lock Auto: In One-shot AF mode with evaluative metering exposure is locked when focus is achieved. Manual: By AE lock Button in creative zone modes.
Exposure Compensation +/-3 EV in 1/3 stop increments
AEB 3 shots, +/- 2 EV, 1/3-stop increments (can be used together with Exposure Compensation)
ISO Sensitivity ISO AUTO (100 - 25600), 100 - 25600 in 1/3 stop increments [8] Movie: ISO AUTO (100 - 6400), 100 - 12800 in 1/3-stop increments

Shutter

HideShow
Shutter Speed 30 - 1/4000 sec (1/3 stop increments), Bulb (Total shutter speed range. Available range varies by shooting mode)

White Balance

HideShow
White Balance Type Auto white balance with the imaging sensor
White Balance Settings AWB, Daylight, Shade, Cloudy, Tungsten light, White Fluorescent light, Flash, Custom, Colour Temperature (100 Kelvin increments) White balance compensation: 1. Blue/Amber +/-9 levels 2. Magenta/ Green +/-9 levels
Custom White Balance Yes, 1 setting can be registered

Screen

HideShow
Screen Type 7.5 cm (3.0”) ClearView II Touchscreen LCD (TFT). 3:2 aspect ratio. Approx. 1,040,000 dots. Electrostatic capacitive type. Tiltable 180 degrees up.
Screen Coverage Approx. 100%
Screen Display Options Customisable and toggle via INFO. Button (1) Liveview image with basic info (2) Liveview image with full info (3) Liveview image with no information (4) Quick Control Screen Customisable settings: Shooting Info, Grid overlay (x2 formats), Histogram (Brig
Built-in Flash Coverage Maximum coverage at approx. 15mm (35mm equivalent: approx. 24mm)
Built-in Flash recycle time Approx. 5 seconds [26]
Flash Modes Auto (E-TTL II), Manual Flash On/Off (3 flash power output settings)
X-sync 1/200 sec
Red-Eye Reduction Yes - with red eye reduction lamp
Flash Exposure Compensation +/- 2 EV in 1/3 increments
Flash Exposure Bracketing Yes, with compatible external flash
Flash Exposure Lock Yes, via AEL Button
Second Curtain Synchronisation Yes
HotShoe/ PC terminal Yes/ No

Shooting

HideShow
Shooting Modes Scene Intelligent Auto, Hybrid Auto, Creative Assist, SCN(Self-Portrait, Portrait, Landscape, Close-up, Sports, Food, Panning, Handheld Night Scene, HDR Backlight Control), Creative Filters (Grainy B/W, Soft Focus, Fish-eye Effect, Art bold effect, Water
Picture Styles Auto, Standard, Portrait, Landscape, Fine Detail, Neutral, Faithful, Monochrome, User Defined (x3)
Colour Space sRGB
Image Processing Highlight Tone Priority Auto Lighting Optimizer (4 settings) Long exposure noise reduction High ISO speed noise reduction (4 settings + Multi Shot NR) Lens peripheral illumination correction Chromatic aberration correction Diffraction correction Creative
Drive modes Single, High-Speed Continuous, Low-Speed Continuous, Self timer (2s, 10s, Custom, Remote)
Continuous shooting speed Fixed AF: Approx. 6.1 shots/s for up to 89 frames in JPEG and 21 frames in RAW [21] With AF: Approx. 4 shots/s [22]
Intervalometer Time-Lapse Movie Mode

Live View Mode

HideShow
Live View Coverage Approx. 100% (horizontally and vertically)

File Type

HideShow
Still Image File Type JPEG: Fine, Normal (Exif 2.30 compliant) / Design rule for Camera File system (2.0) RAW: RAW (14-bit, Canon original RAW 2nd edition), Digital Print Order Format [DPOF] Version 1.1 compliant
RAW+JPEG simultaneous recording Yes, RAW + various JPEG compression possible
Image File Size RAW: (3:2) 6000 x 4000, (4:3) 5328 x 4000, (16:9) 6000 x 3368, (1:1) 4000 x 4000 JPEG 3:2: (L) 6000 x 4000, (M) 3984 x 2656, (S1) 2976 x 1984, (S2) 2400 x 1600 JPEG 4:3: (L) 5328 x 4000, (M) 3552 x 2664, (S1) 2656 x 1992, (S2) 2112 x 1600 JPEG 16:9: (L
Movie File Type MP4 [Video: MPEG-4 AVC/H.264, Audio: MPEG-4 AAC-LC (stereo)]
Movie File Size Full HD - 1920 x 1080 (59.94, 50, 29.97, 25, 23.976 fps) HD - 1280 x 720 (59.94, 50 fps) VGA - 640 x 480 (29.97, 25 fps)
Movie Length Max duration 59min 30sec
Folders New folders can be automatically created monthly or daily
File Numbering (1) Consecutive numbering (2) Auto reset

Other Features

HideShow
Metadata Tag User copyright information (Author's Name, Copyright Details) Image rating (0-5 stars)
Intelligent Orientation Sensor Yes, with Image Rotate
Playback zoom 2x - 10x enabled in 10 steps
Display Formats 1) Single image with information (toggle up to 8 options) (2) Single image (3) Index display (6/12/42/110 images) (4) Jump Display (1/10/100 image, by shot date, by rating)
Display Formats Playback time: 3/4/5/6/7/8/9/10/15/30 seconds Repeat: On/Off Transition Effects: Off, Fade
Histogram Brightness/ RGB
Highlight Alert Yes
Image Erase/Protection Erase: Single image, Selected images, Selected range, All images Protection: Selected images, Selected range, All images. Unprotect all images
Menu Categories (1) Shooting menu (x8) (2) Playback menu (x5) (3) Setup menu (x4) (4) Custom Functions menu (5) My Menu
Menu Languages 25 Languages English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Romanian, Ukrainian, Turkish, Arabic, Thai, Simplified Chinese, Traditional Chinese, Korean and Japan
Firmware Update Firmware update possible by the user.

Interface

HideShow
Computer/Other Hi-Speed USB (Mini USB connector)
HDMI HDMI (Micro - Type-D connector)

Direct Print

HideShow
Canon Printers Canon Compact Photo Printers and PIXMA Printers supporting PictBridge
PictBridge Yes (via USB or Wireless LAN)

Storage

HideShow
Storage Type SD, SDHC, SDXC (UHS-1 compatible)

Software

HideShow
PC Supported Operating system Windows 10 / 8.1 / 8 / 7 SP1 [24], Mac OS X 10.9 / 10.10 / 10.11 / 10.12. For Wi-Fi connection to a PC: Windows 10 / 8.1 / 8 / 7 SP1, Mac OS X 10.9 / 10.10. For Image Transfer Utility: Windows 10 / 8.1 / 8 / 7 SP1, Mac OS X 10.9 / 10.10 / 10.11 / 10.12
Image Processing Digital Photo Professional
Other Software Picture Style Editor, EOS Utility, Image Transfer Utility, Camera Connect app available on iOS and Android devices [25]

Power Source

HideShow
Batteries 1 x Rechargeable Li-ion Battery LP-E12
Battery life With LCD monitor: Approx. 295 shots (at 23 °C, AE 50%, FE 50%) ECO Mode: Approx. 410 shots (at 23 °C, AE 50%, FE 50%)
Battery Indicator 4 levels
Power saving Display off (15, 30 sec or 1, 3, 5, 10, 30 mins) Auto Power Down (30 sec or 1, 3, 5, 10 mins, Disable) ECO mode
Power Supply & Battery Chargers Battery charger LC-E12, AC Adapter Kit ACK-E12, DC Coupler DR-E12, Compact power adapter CA-PS700

Physical Specifications

HideShow
Body Materials Polycarbonate
Operating Environment 0 – 40 °C, 85% or less humidity
Dimensions (WxHxD) 108.2 x 67.1 x 35.1 mm
Camera Weight Approx. 302 g (CIPA testing standard, including battery and memory card)

What's included

  • Canon EOS M6 Camera Body (Black)
  • Canon EOS M6 Camera Body (Black)
  • Battery Pack LP-E17
  • Battery Charger LC-E17E

M100 what included

Downloads

Support FAQs

x

Checking Stock...

We are just checking the shelves to ensure we have enough stock for your order.